[cisco-voip] how to conf 3 digit ext if we are getting 4 fromcarrier

[James Grace]

Hey this seems to work   WOW  well can I ask what will be the best way to go
from 3 digs to 4.  the issue is that the custom request to keep there
current setup which is 3 digs.. But I know they are going to come back and
say we want to go with 4 dig for growth ability.  I know in unity u can add
or del digits to the ext..  What can you do for the CM 

 

  _____  

From: Ortiz, Carlos [mailto:CORTIZ at broward.org] 
Sent: Wednesday, May 03, 2006 4:02 PM
To: James Grace; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] how to conf 3 digit ext if we are getting 4
fromcarrier

 

Use a Translation pattern to shorten.  I get 7 digits from the telco and
transform that into 4.

 

e.g.

telco sends 4200 

Translastion pattern 4XXX

Called Party Transfrom mask XXX

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Wednesday, May 03, 2006 3:44 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] how to conf 3 digit ext if we are getting 4
fromcarrier

 

how to conf 3 digit ext if we are getting 4 from carrier

 

im doing a site that want to use 3 dig ext.  and the carrier are sending 4
dig for our DID..

Ive already conf the CM with 3 dig.  What can I do at this point  

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060503/5a6503fa/attachment-0001.html