[cisco-voip] Monitor H.323 PRI Usage

[Brian Henry]

I am not much of a scriptor but there is a product that you might want to look at that sits between  the Telco and your GW.  It will give you all you want but I do not know the $$
 
http://www.securelogix.com
 
Brian 

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Andrew Dignan
Sent: Wed 5/3/2006 7:06 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Monitor H.323 PRI Usage



Has anyone come up with a quick and dirty way to monitor channels on a PRI
connected to an H.323 device with CallManager?

Normally RTMT or CDR/ART will give me what I want.  However, I am in a
scenario where CVP is being used so calls inbound from the PSTN to the
call center do not get routed to CallManager.  Therefore, CDR/ART and RTMT
do not see these calls.

I can see this info via ios commands (show isdn active/service, etc) but
is there anything I can use to send this info to a syslog server or
something?  I can build a cacti server but I don't have the time to do
this.

regards
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060503/a7d4f19d/attachment-0001.html