[cisco-voip] VG224 Issue / propable misunderstanding

[Bernhard Albler]

Hi everyone,
 
maybe someone can shed some light on this, because I'm banging my head against the wall.
It's probably a misunderstanding of how analog sccp ports work on my side, but maybe someone still can help:
I have a vg224 which has connected diverse analog devices connected to it.
When someone places a call from one of the analog devices to a ip phone, and the ip phone hangs up, the analog devices doesn't get anything (now busy tone played) on the sccp version. After some time, the vg goes offhook again (according to tac this is normal behavior because of a timer) and so we have dead air until the annunicator kicks in.
Now:
what would be the "correct" behavior for a analog devices here. On a FXS port, is there even some way to indicate the device, that the remote site has hung up? Is there some way to get the vg to play busy tone after the other side went onhook?
If someone from cisco wants to look into the case i have open, the number is 603254525
 
I'm completely stumped here, can someone help?
many thanks in advance
bernhard
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060504/a0ad99ff/attachment.html