[cisco-voip] shared line operation different in 4 vs. 3

[Ryan Ratliff]

Sounds like Privacy is getting you.
http://www.cisco.com/en/US/products/sw/voicesw/ps556/ 
products_administration_guide_chapter09186a00803f3a86.html

-Ryan

On May 10, 2006, at 10:35 AM, Frazee, Timothy wrote:

All,



Just did an upgrade from 3.3.4 to 4.1.3sr3a. Client had multiple  
shared lines all over the place. As they are now interested in line  
groups to change the way they route calls, they brought up a good  
question.



Before, on 3.3.4, if another phone was using the shared line, all the  
other phones that also shared that line showed the caller info on the  
lcd screen. Its quite handy with the secretaries.



Now with 4, it just shows line status (on hook, off hook, ringing).  
Has anyone seen this? Does anyone know how to make this work like it  
did in 3.3.4?



Timothy Frazee

Network Solutions

Automatic Data Processing, Inc.

Dealer Services



<image001.jpg>




This message and any attachments are intended only for the use of the  
addressee and may contain information that is privileged and  
confidential. If the reader of the message is not the intended  
recipient or an authorized representative of the intended recipient,  
you are hereby notified that any dissemination of this communication  
is strictly prohibited. If you have received this communication in  
error, please notify us immediately by e-mail and delete the message  
and any attachments from your system.

<image001.jpg>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip