[cisco-voip] trying outbound call on Centrex POTS lines
Kevin Thorngren
kthorngr at cisco.com
Wed May 10 15:56:34 EDT 2006
Are you saying that the Centrex is expecting to see 9 + number for
outbound calls?
If so you have the flexibility of having the users dial 9 + 9 + number
(use a 9.9[2-9]XX[2-9]XXXXXX pattern and predot discard) or just 9 +
number (use a 9[2-9]XX[2-9]XXXXXX pattern and no digit manipulation).
You just need to make sure the CCM sends the appropriate digits to the
centrex.
Kevin
On May 10, 2006, at 3:36 PM, James Grace wrote:
> Hello we have a cm with 4 port fxo config as mgcp. We are connecting
> 4 Centrex POTS lines to the 2811 GW. In the old system (Norstar) I
> believe the users had to hint the 9 to access to centrex lines and
> then a 9 again plus the rest of the number to dial out…. Since the
> centrex is a hosted type solution, what will be the best way to
> config this with my cisco solution. Will I have to tell the users to
> do it the same way as before. 9….9 + number
>
> James D. Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer / Professional Svc.
> Digitel Corporation
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 1825 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060510/cc0785d0/attachment.bin
More information about the cisco-voip
mailing list