[cisco-voip] 2 Questions...

[Patrick Mowry]

If you have the older Cisco phones and an af power switch that provides
power on the non-data pairs, it should work if you can set the power to
always on.  I use the power injectors for Aironet 1200 Access points
with my 7940/60 phones.  The power injector is an always on, non-data
pair POE source.  Some of the newer phones support af and Cisco
proprietary POE.

For CME you should get the additional files for CME that match you IOS
version from CCO.  I believe this includes a tar file with the GUI
application, phone loads, and music on hold file.  Phone related
configuration you can do from a GUI at http://<router IP
Address>/ccme.html . External calling is setup with pots dial peers like
any other H323 gateway.  I can send you a sanitized config file it you
want.  Here is some of the beginning configs to get you started.

tftp-server flash:P00303020214.bin
!
telephony-service
 load 7960-7940 P00303020214
 max-ephones 36
 max-dn 108
 ip source-address <Ethernet IP> port 2000
 time-zone 8
 caller-id block code *72
 system message Text displayed at the bottom of the phone
 create cnf-files version-stamp 7960 Oct 25 2005 16:15:14
 voicemail 889
 max-conferences 8
 moh music-on-hold.au
 web admin system name admin password admin
 dn-webedit 
 time-webedit 
 transfer-system full-consult
 secondary-dialtone 9
end

-Patrick
------------------------------

Message: 3
Date: Wed, 10 May 2006 18:06:44 -0600
From: "cisco.ipt" <cisco.ipt at gmail.com>
Subject: [cisco-voip] 2 Questions...
To: cisco-voip at puck.nether.net
Message-ID:
	<8ebc12a90605101706q29090758hbe8ed2028f8b4e43 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

1. If I have a NON-POE Cisco IP phone, is there a RJ45 cable that can
deliver POE by switching the pins? Where can you buy such a cable?


2. CME - anyone have a basic 'how-to' for CME? I have never installed
and
setup a CME router but I have a 2811 to play with, any suggestions?

thanks,
JD