[cisco-voip] T1 CAS - Caller ID

[Andrew Dignan]

Right.  And according to this link:

http://www.cisco.com/en/US/partner/products/sw/iosswrel/ps1834/products_feature_guide09186a008007fe27.html

You need the option of "ds0-group 1 timeslots 1-24 type e&m-fgb dtmf dnis"
along with "signalling class" commands (which are on a non-as5x00).

Would just a regular "e&m-wink-start" configuration along with the
"signalling class" commands work??

> Output from a 2811 running 12.4.4T:
>
> r-2621-1a(config-controller)#ds0-group 0 timeslots 1-24 type ?
>   e&m-delay-dial       E & M Delay Dial
>   e&m-fgd              E & M Type II FGD
>   e&m-immediate-start  E & M Immediate Start
>   e&m-lmr              E & M land mobil radio
>   e&m-wink-start       E & M Wink Start
>   ext-sig              External Signaling
>   fgd-eana             FGD-EANA BOC side
>   fgd-os               FGD-OS BOC side
>   fxo-ground-start     FXO Ground Start
>   fxo-loop-start       FXO Loop Start
>   fxs-ground-start     FXS Ground Start
>   fxs-loop-start       FXS Loop Start
>   none                 Null Signalling for External Call Control
>   <cr>
>
> r-2621-1a(config-controller)#ds0-group 0 timeslots 1-24 type
>
>> -----Original Message-----
>> From: cisco-voip-bounces at puck.nether.net
>> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Andrew Dignan
>> Sent: Wednesday, May 17, 2006 1:39 PM
>> To: cisco-voip at puck.nether.net
>> Subject: [cisco-voip] T1 CAS - Caller ID
>>
>> >From what I can gather and have implemented myself, the only way
>> >possible
>> with a non AS5x00 platform to receive ani is to use feature
>> group d.  The carrier (Sprint) is saying they will have to
>> charge the customer to use fgd.
>>
>> Sprint wants to send the ani/dnis in the format of,
>> *3105551234*5413011* (ani * dnis).  This is only supported on
>> the AS5x00 to receive the ani/dnis in this format.
>>
>> I am getting conflicting reports from a Cisco SE that says an
>> ISR router can receive ANI in the format above without
>> configuring FGD.  Am I missing something here?  Is there a
>> .tcl script that can accomplish this on a non AS5x00?
>>
>> ----------------------------------------------------
>> Reference Bug ID (CSCef51564):
>> Externally found enhancement defect: New (N)
>>
>> CT1 CAS ANI/DNIS Delimiter feature support for non-AS5XXX platforms
>>
>> ---------------
>> Symptoms:
>> ---------------
>>
>> The "ANI/DNIS Delimiter for CAS Calls on CT1" feature
>> introduced in IOS 12.1(2)T for the AS5XXX voice gateways is
>> not available on other voice platforms capable of supporting
>> T1 CAS voice.
>>
>> ---------------
>> Conditions:
>> ---------------
>>
>> This feature is not available on any non-AS5XXX voice
>> gateways which is capable of T1 CAS voice.  The feature was
>> originally written for the AS5XXX voice platforms and has
>> never been ported to any other voice gateway family.
>>
>> ---------------
>> Workaround:
>> ---------------
>>
>> It will be necessary to us an AS5XXX voice gateway to support
>> this feature if ANI and DNIS are to be delivered on T1 E&M
>> FGB (wink-start) CAS trunks as a single DTMF digit sequence
>> where the two fields are delimited by special characters such as '*
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>