[cisco-voip] NM-HDV with SIMMS

[Rick Truong]

Hi Stu,

 

I am sure that is the cause.  Install a VWIC-2MFT-T1 and all 4 x PVDM-12's
should show up when you do a sh diag.  Or if you just want to make sure they
are PVDM-12's, you could just put the VWIC-2MFT-E1 from the other NM into it
for a quick test to see if they are PVDM-12's.  But yes, if you want to
actually use the NM-HDV-48, you will have to purchase or get your hands on a
VWIC and install it into the NM.

 

* We buy and sell networking equipment.  Please contact me if you have any
offers or are interested in purchasing. *

 

* VG224's and VG248's NEW IN BOX in stock! *

 

Thanks,

 

Rick Truong

TruTech Systems

39263 Half Moon Circle

Murrieta, CA 92563

Office: 951.696.3688

Mobile: 951.440.8711

AIM: ricktrutek

E-Mail: rick at trutechsystems.net

WEB: http://www.trutechsystems.net

 

  _____  

From: Stu Packett [mailto:SPackett at fenwick.com] 
Sent: Thursday, May 18, 2006 9:29 AM
To: Rick Truong; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] NM-HDV with SIMMS

 

The NM-HDVs with 4 SIMMS actually had a VWIC-1MFT-T1 installed in it, but we
moved the VWIC-1MFT-T1 to a 2811.  With this information, what do we need to
do to make the 4 PVDM-12s appear in a 'sh diag' or will they only show up if
there is VWIC installed with it?

 

  _____  

From: Rick Truong [mailto:rick at trutechsystems.net] 
Sent: Thursday, May 18, 2006 9:11 AM
To: Stu Packett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] NM-HDV with SIMMS

Hi Stu,

 

Normally, they are PVDM-12's.  What does it say exactly when you do the sh
diag?  With 5 PVDM's, it must mean you have a NM-HDV-2E1-60 card, with 4,
you might have a NM-HDV-2T1-48.  It could be PVDM-4, 8, or something else.

 

Also, there might be a possibility that the NM-HDV is not functioning
properly.  Just a guess.  Does the NM have a VWIC-2MFT-T1 installed in it as
well?  The PVDM's might not show up if you don't have the VWIC in it.  

 

You could try taking out the 5 x PVDM-12's out of the one that recognizes
the PVDM-12's, and putting the 4 SIMMs into it and see if they are
recognized as PVDM-12's

 

* We buy and sell networking equipment.  Please contact me if you have any
offers or are interested in purchasing. *

 

* VG224's and VG248's NEW IN BOX in stock! *

 

Thanks,

 

Rick Truong

TruTech Systems

39263 Half Moon Circle

Murrieta, CA 92563

Office: 951.696.3688

Mobile: 951.440.8711

AIM: ricktrutek

E-Mail: rick at trutechsystems.net

WEB: http://www.trutechsystems.net

 

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Stu Packett
Sent: Thursday, May 18, 2006 8:56 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] NM-HDV with SIMMS

 

I have a few NM-HDVs with different SIMM configurations.  One set has 5
SIMMS and the 'sh diag' says they are PVDM-12 SIMMs.  The other set has 4
SIMMS, but the 'sh diag' does not show the PVDM-12s.  Could the 4 SIMMs on
the NM-HDV be something different than the PVDM-12s?  I went to the link
below, but could not gather the info I needed.  So, are these PVDM-12s or
another part?

 
<http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a008
00b65d6.shtml>
http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a0080
0b65d6.shtml 

Thanks in advance. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060518/4474f3a7/attachment-0001.html