[cisco-voip] NM-HDV with SIMMS

[Stu Packett]

The NM-HDVs with 4 SIMMS actually had a VWIC-1MFT-T1 installed in it,
but we moved the VWIC-1MFT-T1 to a 2811.  With this information, what do
we need to do to make the 4 PVDM-12s appear in a 'sh diag' or will they
only show up if there is VWIC installed with it?

________________________________

From: Rick Truong [mailto:rick at trutechsystems.net] 
Sent: Thursday, May 18, 2006 9:11 AM
To: Stu Packett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] NM-HDV with SIMMS



Hi Stu,

 

Normally, they are PVDM-12's.  What does it say exactly when you do the
sh diag?  With 5 PVDM's, it must mean you have a NM-HDV-2E1-60 card,
with 4, you might have a NM-HDV-2T1-48.  It could be PVDM-4, 8, or
something else.

 

Also, there might be a possibility that the NM-HDV is not functioning
properly.  Just a guess.  Does the NM have a VWIC-2MFT-T1 installed in
it as well?  The PVDM's might not show up if you don't have the VWIC in
it.  

 

You could try taking out the 5 x PVDM-12's out of the one that
recognizes the PVDM-12's, and putting the 4 SIMMs into it and see if
they are recognized as PVDM-12's

 

* We buy and sell networking equipment.  Please contact me if you have
any offers or are interested in purchasing. *

 

* VG224's and VG248's NEW IN BOX in stock! *

 

Thanks,

 

Rick Truong

TruTech Systems

39263 Half Moon Circle

Murrieta, CA 92563

Office: 951.696.3688

Mobile: 951.440.8711

AIM: ricktrutek

E-Mail: rick at trutechsystems.net

WEB: http://www.trutechsystems.net

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Stu Packett
Sent: Thursday, May 18, 2006 8:56 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] NM-HDV with SIMMS

 

I have a few NM-HDVs with different SIMM configurations.  One set has 5
SIMMS and the 'sh diag' says they are PVDM-12 SIMMs.  The other set has
4 SIMMS, but the 'sh diag' does not show the PVDM-12s.  Could the 4
SIMMs on the NM-HDV be something different than the PVDM-12s?  I went to
the link below, but could not gather the info I needed.  So, are these
PVDM-12s or another part?

http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186a
00800b65d6.shtml
<http://www.cisco.com/en/US/tech/tk652/tk701/technologies_tech_note09186
a00800b65d6.shtml>  

Thanks in advance. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060518/5e49f24c/attachment.html