[cisco-voip] VG248 port stuck offhook

[Green, Ronnie]

I have had the same problem with patient room phones, I have had
discussions with Cisco and have not found a reason or solution.  What's
strange is I can receive calls but can't make calls or get a dial tone
and the gateway recognizes when I go off hook or on hook.  To clear it I
have to telnet to the VG248 and do a restart, this takes care of the
problem until the next time which happens about every 5-6 weeks randomly
with different phones.  
 
Ronnie Green
Director of IT
McBride Clinic, Inc.
 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ed Leatherman
Sent: Thursday, May 18, 2006 9:33 AM
To: Cisco Voip
Subject: [cisco-voip] VG248 port stuck offhook


Anyone had a single port on VG248 stuck offhook before? I've tried
disabling the port and re-enabling. The Fax machine connected to it is
on hook.

Trying to cover all the bases before I ask them to check the wiring. 

-- 
Ed Leatherman
IP Telephony Coordinator
West Virginia University
Telecommunications and Network Operations

CONFIDENTIALITY NOTICE: This e-mail message, including any attachments, 
is for the sole use of intended recipients, and may contain privileged 
and confidential information. If you are not the intended recipient 
destroy all copies and reply by e-mail to the sender. Unauthorized review, 
use, distribution, or disclosure of this information is prohibited.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060518/1a1d99e1/attachment.html