[cisco-voip] we are recieving a N/A on calling number

[James Grace]

Is there a way to tell CM or the GW to complete the call when the calling
number = N/A.  I just talk to the carrier ATnT  and they said we rejecting
the call because of what they are send us.  we are receiving a N/A on
calling number when I do isdn q931 . 

 

 

*May 26 15:24:41.164: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8  callref =
0x01E

        Bearer Capability i = 0x8090A2

                Standard = CCITT

                Transfer Capability = Speech

                Transfer Mode = Circuit

                Transfer Rate = 64 kbit/s

        Channel ID i = 0xA98381

                Exclusive, Channel 1

        Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have in-band
in

        Calling Party Number i = 0x00C3, N/A

                Plan:Unknown, Type:Unknown

        Called Party Number i = 0x80, '3035'

                Plan:Unknown, Type:Unknown

*May 26 15:24:41.180: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8  callref
= 0

        Channel ID i = 0xA98381

                Exclusive, Channel 1

*May 26 15:24:41.408: ISDN Se0/0/0:23 Q931: TX -> ALERTING pd = 8  callref =
0x

        Progress Ind i = 0x8088 - In-band info or appropriate now available

*May 26 15:24:41.548: ISDN Se0/0/0:23 Q931: TX -> CONNECT pd = 8  callref =
0x80

*May 26 15:24:41.572: ISDN Se0/0/0:23 Q931: RX <- CONNECT_ACK pd = 8
callref =0

*May 26 15:24:47.692: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8  callref
=

        Cause i = 0x8390 - Normal call clearing

*May 26 15:24:47.704: ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8  callref =
0x80

*May 26 15:24:47.732: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8
callref 0

 

James D. Grace 

CCNP CCNA MCSE MCDBA

Sr. System Engineer / Professional Svc.

Digitel Corporation

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060526/10551161/attachment-0001.html