[cisco-voip] we are recieving a N/A on calling number

[Kevin Thorngren]

The below debug looks normal and there are no errors or reject messages 
from the CCM to the telco.  The same is true with the previous debug 
you sent, except we did not see the disconnect cause code.  The ISDN 
signaling looks to be fine.  The call is being disconnected from the 
PSTN side, whether the disconnect is initiated by the telco or the 
caller   would be interesting to know.  Again, what does the caller 
hear when placing the call?

CCM does not care about the calling party info.  Have you compared q931 
debug to a working call to see what differences there are in the 
signaling?

Kevin
On May 26, 2006, at 1:59 PM, James Grace wrote:

>
> Is there a way to tell CM or the GW to complete the call when the 
> calling number = N/A.  I just talk to the carrier ATnT  and they said 
> we rejecting the call because of what they are send us.  we are 
> receiving a N/A on calling number when I do isdn q931 .
>  
>  
> *May 26 15:24:41.164: ISDN Se0/0/0:23 Q931: RX <- SETUP pd = 8  
> callref = 0x01E
>         Bearer Capability i = 0x8090A2
>                 Standard = CCITT
>                 Transfer Capability = Speech
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
>         Progress Ind i = 0x8281 - Call not end-to-end ISDN, may have 
> in-band in
>         Calling Party Number i = 0x00C3, N/A
>                 Plan:Unknown, Type:Unknown
>         Called Party Number i = 0x80, '3035'
>                 Plan:Unknown, Type:Unknown
> *May 26 15:24:41.180: ISDN Se0/0/0:23 Q931: TX -> CALL_PROC pd = 8  
> callref = 0
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
> *May 26 15:24:41.408: ISDN Se0/0/0:23 Q931: TX -> ALERTING pd = 8  
> callref = 0x
>         Progress Ind i = 0x8088 - In-band info or appropriate now 
> available
> *May 26 15:24:41.548: ISDN Se0/0/0:23 Q931: TX -> CONNECT pd = 8  
> callref = 0x80
> *May 26 15:24:41.572: ISDN Se0/0/0:23 Q931: RX <- CONNECT_ACK pd = 8  
> callref =0
> *May 26 15:24:47.692: ISDN Se0/0/0:23 Q931: RX <- DISCONNECT pd = 8  
> callref =
>         Cause i = 0x8390 - Normal call clearing
> *May 26 15:24:47.704: ISDN Se0/0/0:23 Q931: TX -> RELEASE pd = 8  
> callref = 0x80
> *May 26 15:24:47.732: ISDN Se0/0/0:23 Q931: RX <- RELEASE_COMP pd = 8  
> callref 0
>  
> James D. Grace
> CCNP CCNA MCSE MCDBA
> Sr. System Engineer / Professional Svc.
> Digitel Corporation
>  
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: text/enriched
Size: 5081 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20060526/4a955987/attachment.bin