[cisco-voip] Return codes for Database Layer Monitor serice, kDbConnectionFailed error

[Erick Bergquist]

Wes,  Thanks for the info. 

----- Original Message ----
From: Wes Sisk <wsisk at cisco.com>
To: Erick Bergquist <erickbe at yahoo.com>
Cc: ciscovoip <cisco-voip at puck.nether.net>
Sent: Wednesday, May 31, 2006 10:37:57 AM
Subject: Re: [cisco-voip] Return codes for Database Layer Monitor serice, kDbConnectionFailed error

Unfortunately it is a generic error. There is a short list of errors 
DCOM returns to DBL that are identified (but still not very useful) all 
others are mapped to this generic error. 

/Wes

Erick Bergquist wrote:
> Does anyone know what a return code of 0x0000000B or 0x00000000 is on these errors, or have a list? 
> The CCM system error doc doesn't seem to list them.
>
> The trace file has other database connection failures with a variety of return codes. Just trying to figure out what happened (problem cleared itself up, it appears) and all the servers have hosts and lmhosts file entries so name resolution shouldn't be a issue unless there was a brief network-issue. 
>
> Event Source:    Cisco Database Layer Monitor
> Event Category:    None
> Event ID:    3
> Date:        5/29/2006
> Time:        7:50:36 PM
> User:        N/A
> Computer:    CCM
> Description:
> Error: kDbConnectionFailed - Database connection failed.
>   Additional Information: Could not open connection. ReturnCode=
> [0x0000000B]
>   App ID: Cisco Database Layer Monitor
>   Cluster ID: StandAloneCluster
>   Node ID: 10.1.1.1
> Explanation: An attempt to connect to database failed.
> Recommended Action: Enable trace for the database layer monitor to get
> specific error information.. 
>
> Thanks
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>