[cisco-voip] Break Mirror on HP MCS

[Voll, Scott]

I always shut down the Server.... Pull the drive.... Power up the
server.... Then put in the new drive.

 

I have never pulled a drive in use.  Probably not the best option.

 

Scott

 

________________________________

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Klaczko, Edwin
Sent: Friday, November 03, 2006 6:17 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Break Mirror on HP MCS

 

I've ordered some spare HDs and wanted to use them to keep an extra
backup.  I'm used to working with Dell servers and had a bad experience
pulling a hot-swap drive live.  Their RAID controller allows you to
power down a drive to remove it.  I couldn't find a similar feature on
the HP interface.  Is this necessary or is it safe just to pull the
drive live.  Any help would be appreciated.

 

 

Eddie Klaczko

IP Telephony / Network Specialist

CC Schaumburg School District 54

eklaczko at sd54.org

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061103/b8efd384/attachment-0001.html