[cisco-voip] OT: Booting Multiple IOS on 3745?
Tech Guy
techguy at gmail.com
Fri Nov 3 11:29:46 EST 2006
This is partially off topic I guess, the 3745 is being used as a voice
gateway so it is kinda voice related. :-)
Here is the issue, I have one IOS on the 3745 flash, and another on the
slot0: card.
I have the following config to load the IOS off of the slot0: card:
boot-start-marker
boot system slot0:c3745-advipservicesk9-mz.124-3f.bin
boot system flash:c3745-ipbase-mz.123-9a.bin
boot-end-marker
With card in slot0: it boots fine with the image I want.
However with the card not in the slot, it just hangs at rommon.
I thought, that it would fail over to the IOS on the second line in flash if
it could not find the one in slot0 ?
I know you can have it boot from a second IOS if there is a problem with the
first, but maybe only if they reside in the same location?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061103/96776dbd/attachment.html
More information about the cisco-voip
mailing list