[cisco-voip] OT: Booting Multiple IOS on 3745?

[Philip Walenta]

Try:
 
boot system flash flash:c3745-ipbase-mz.123-9a.bin

  _____  

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Tech Guy
Sent: Friday, November 03, 2006 10:30 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] OT: Booting Multiple IOS on 3745?


This is partially off topic I guess, the 3745 is being used as a voice
gateway so it is kinda voice related.  :-)

Here is the issue, I have one IOS on the 3745 flash, and another on the
slot0: card.

I have the following config to load the IOS off of the slot0: card: 

boot-start-marker
boot system slot0:c3745-advipservicesk9-mz.124-3f.bin
boot system flash:c3745-ipbase-mz.123-9a.bin
boot-end-marker

With card in slot0: it boots fine with the image I want.

However with the card not in the slot, it just hangs at rommon.

I thought, that it would fail over to the IOS on the second line in flash if
it could not find the one in slot0 ?

I know you can have it boot from a second IOS if there is a problem with the
first, but maybe only if they reside in the same location? 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061103/333329fb/attachment.html