[cisco-voip] Cisco CCM / Qsig Integration Question

[Voll, Scott]

I don't know if I understand the question correctly.

I have a CCM connected via a mgcp VGW over t1 PRI QSIG without issues.
It passes all names and extensions back and forth.

CM is my front end PBX to the PSTN so calls come in the CM PRI VGW then
route over to the PBX Qsig without issue.  I just use the (####) route
pattern because if it doesn't match on the CM then I must go to the PBX.

Scott

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bernhard Albler
Sent: Monday, November 06, 2006 9:30 AM
To: cisco-voip at puck-nether.net
Subject: [cisco-voip] Cisco CCM / Qsig Integration Question

Hi guys,

I have a pretty interesting design question:

We have a customer, who currently has several PBXs connected via Voice
gateways (28XX) using QSIG. The PBXs are setup with any to any
connectivity via dial-peers.
Now the customer is looking to deploy his first callmanager site. The
problem is, that it is replacing an existing site, so we have to
integrate into the Qsig VOIP Network, without having a local pbx there.
So, what are possibilities of doing this? Would it be possible to take
all the existing voice gateways into mgcp control of the ccm and pass
the Qsig between them via the ccm?
Has anyone encountered or dealt with this issue?
Regards
bernhard

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip