[cisco-voip] Cisco CCM / Qsig Integration Question

[Bernhard Albler]

Hi Scott,
yeah, that works fine, we actually have deployed several such scenarios

. The problem is, that I wouldn't have to integrate with just one qsig PBX. The Central PBX is replaced by the ccm, so I don't have a local pbx with which to integrate with.  Rather I would have ti integrate with half a dozen PBXs in other locations, which are networked via QSIG over h323 (classic Voip toll bypass). I believe, that it would not be possible to connect back to back to the network of PBXs, because CCM expects only one pbx behind a MGCP Qsig Link, rather than many.
I'm just not sure what would work in such a scenario.

Many thanks
bernhard

------------------------------------------
DI (FH) Bernhard Albler, NTS AG 
Tel.: +43 (316) 405 455 -0, email: balbler at nts.at 
 

> -----Ursprüngliche Nachricht-----
> Von: Voll, Scott [mailto:Scott.Voll at wesd.org]
> Gesendet: Montag, 06. November 2006 18:42
> An: Bernhard Albler; cisco-voip at puck-nether.net
> Betreff: RE: [cisco-voip] Cisco CCM / Qsig Integration Question
> 
> I don't know if I understand the question correctly.
> 
> I have a CCM connected via a mgcp VGW over t1 PRI QSIG without issues.
> It passes all names and extensions back and forth.
> 
> CM is my front end PBX to the PSTN so calls come in the CM PRI VGW then
> route over to the PBX Qsig without issue.  I just use the (####) route
> pattern because if it doesn't match on the CM then I must go to the PBX.
> 
> Scott
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Bernhard Albler
> Sent: Monday, November 06, 2006 9:30 AM
> To: cisco-voip at puck-nether.net
> Subject: [cisco-voip] Cisco CCM / Qsig Integration Question
> 
> Hi guys,
> 
> I have a pretty interesting design question:
> 
> We have a customer, who currently has several PBXs connected via Voice
> gateways (28XX) using QSIG. The PBXs are setup with any to any
> connectivity via dial-peers.
> Now the customer is looking to deploy his first callmanager site. The
> problem is, that it is replacing an existing site, so we have to
> integrate into the Qsig VOIP Network, without having a local pbx there.
> So, what are possibilities of doing this? Would it be possible to take
> all the existing voice gateways into mgcp control of the ccm and pass
> the Qsig between them via the ccm?
> Has anyone encountered or dealt with this issue?
> Regards
> bernhard
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip