[cisco-voip] PSTN Question

[Ahmad Cheikh-Moussa]

Hi!

Following Situation:
Calling Number: 0160xxxxxx
Called Number : 043123xxxxxx

Nov  6 19:32:16.166 MET: ISDN Se0/0/1:15 Q931: RX <- SETUP pd = 8  callref = 0x2B47
        Sending Complete
        Bearer Capability i = 0x8090A3
                Standard = CCITT
                Transfer Capability = Speech
                Transfer Mode = Circuit
                Transfer Rate = 64 kbit/s
        Channel ID i = 0xA18394
                Preferred, Channel 20
        Calling Party Number i = 0x2183, '160xxxxxxx'
                Plan:ISDN, Type:National
        Called Party Number i = 0xC1, '239xxxx'
                Plan:ISDN, Type:Subscriber(local)


Can someone tell me, why I see only 160xxx as the calling number and 
not 0160xxx ? Is there something I have to configure on my gateway or do 
I have to contact my provider, in order to change that ?
I have this behaviour on a H.323  and on a MGCP Gateway.

I need the correct number, in order to be able to put on all
incoming calls a leding "0". So the user can  use the lists on 
the IP Phone to make a direct call back. For example: missed calls,
received calls.

It is a real important thing for me. Please send a reply.

Thanks in advance,
 Ahmad


-- 
Ahmad Cheikh-Moussa 
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/