[cisco-voip] ATA and Paging

[David Fielder (US)]

I have a customer using a Valcom Paging system connected to an ATA186.
This system used to be connected to a Nortel switch. Since the
conversion, the person that is speaking experiences a couple of seconds
delay from the time she speaks until it is heard over the speakers. This
is an annoying problem to the receptionist. Has anyone seen this before?


 

David Fielder




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061108/a7dbd839/attachment.html