[cisco-voip] Best Hardware for Voice Gateways for CallManager 4.2?

[Erick Bergquist]

You should be able to still use H323 with the 7200 VXR unless you needed to use MGCP. 

FYI,  CCM 4.2(1) lets you add a new cisco 72xx gateway as MGCP but it fails on second part with a type mismatch error.  It will then show as a gateway in the list with no modules. In CCM 4.2(3) the 72xx is not listed on the gateways dropdown when adding a new one.  Just in case anyway tried. 

----- Original Message ----
From: "Geisler, Kurt" <Kurt.Geisler at haynesboone.com>
To: cisco-voip at puck.nether.net
Sent: Friday, November 17, 2006 10:53:47 AM
Subject: [cisco-voip] Best Hardware for Voice Gateways for CallManager 4.2?



 


We have noticed that the 7200 VXR is no longer supported as an MGCP gateway 
in CallManager 4.2. We used to like the VG200 as gateways, and they are still 
supported in 4.2, they are just End of Lifed from Cisco. 

So, no low end 
VG200 and no high end 7200 for gateways. What would be a good platform for voice 
gateways to be used as local PSTN and voice WAN? 

I currently have 7206 
VXR's everywhere and was going to use these as gateways for our VoIP solution, 
but now it looks like I will have to purchase additional hardware (maintenance, 
etc) just to have supported voice gateways.


CONFIDENTIALITY NOTICE

This electronic mail transmission is confidential, may be privileged and should be read or retained only by the intended recipient.  If you have received this transmission in error, please immediately notify the sender and delete it from your system.

 
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip






-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061119/59620b54/attachment.html