[cisco-voip] ip phones dont give busy signal

[Toma Tomov]

This Feature is Called CallWaiting.

Could you give me more information about your setup.

Possible reasons for this problem is Codec usage.
  For Example:  Call  From PSTN is translated in gateway to G.729 codec for
example, but "Dialed Phone"  ( phone attached to CCM ) already have active
call  with G.729 codec so call will fail because most Cisco Phones does not
support second call with G.729 codec.




On 11/21/06, gokhan senol <gokhanciscottl at yahoo.com> wrote:
>
> hi
> even the phone is busy , when the second call come , the busy phone doesnt
> give busy signal.
> And the calling person hear ringing tone insted of busy tone.
>
> and this only happens when we make internal calls. But when we try to call
> from outside (i mean from pstn) ,this time the busy phone gives busy singal.
>
> ccm 4.1.3
>
> thknx
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061121/9c00aa11/attachment.html