[cisco-voip] Analog DID w/ VIC2-4FXS/DID

[Kris Seraphine]

I figured it out....

The pair needed to be straight-through on the cable.

On 11/27/06, Kris Seraphine <baryonyx5 at gmail.com> wrote:
>
> Hi
>
> I'm testing a customer's analog lines in preparation for migrating them
> off of their key system onto the corporate CCM system.  They have 4 analog
> DID trunks that work fine on the key system.  I have a 2821 gateway with a
> VIC2-4FXS/DID card.  When I connect the DID trunks to the FXS/DID port and
> place an incoming call to a DID I immediately get fast busy.  I believe the
> signaling to be wink-start but I've tried setting the ports to immediate and
> delay with no success.  Here's the configuration for one of the ports.
>
> voice-port 0/2/0
>  signal did immediate
>
> What seems odd to me is that when I debug vpm signal and vtsp all I don't
> see anything when I place the call.  There's no debug output and the port is
> never activated (the green light does not come on).  I'm trying to get in
> touch with the telco but I thought I'd ask here in the mean time.
>
>
> I know the card is good (at least it works fine when configured as a
> station port card).  Is there anything else I'm missing?
>
> --
> kris seraphine




-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061127/232af843/attachment.html