[cisco-voip] Analog DID w/ VIC2-4FXS/DID

[Kris Seraphine]

Hi

I'm testing a customer's analog lines in preparation for migrating them off
of their key system onto the corporate CCM system.  They have 4 analog DID
trunks that work fine on the key system.  I have a 2821 gateway with a
VIC2-4FXS/DID card.  When I connect the DID trunks to the FXS/DID port and
place an incoming call to a DID I immediately get fast busy.  I believe the
signaling to be wink-start but I've tried setting the ports to immediate and
delay with no success.  Here's the configuration for one of the ports.

voice-port 0/2/0
 signal did immediate

What seems odd to me is that when I debug vpm signal and vtsp all I don't
see anything when I place the call.  There's no debug output and the port is
never activated (the green light does not come on).  I'm trying to get in
touch with the telco but I thought I'd ask here in the mean time.


I know the card is good (at least it works fine when configured as a station
port card).  Is there anything else I'm missing?

-- 
kris seraphine
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061127/ff32b8a9/attachment-0001.html