[cisco-voip] Attendant Console, SRST, hunt pilots

[Robert Kulagowski]

We have a six digit dial plan, where the first two digits are the site 
ID, and the last four are the DID.

On the voice gateway at a remote site, we use translation profiles to 
take the incoming DID (our providers send 4 digits) and prefix the site 
code.

The receptionist has the main number for the site (6 digit DN) as the 
first line appearance.

I currently have a TAC case open because AC users aren't seeing call 
park details in AC when they park a call - they get a screen pop telling 
them the park number, and it says it on their phone, but the AC 
application never shows it in the Parked Calls window.  The TAC engineer 
says that it's because we're not using pilot points and hunt groups, and 
that's the first thing to fix.  Assuming that I have to implement pilot 
points and hunt groups for all of this to work, would it be something like:

1)  Remove existing main number DN from receptionist phone.
2)  Create a pilot point with the six digit main number for the site.
3)  Create a line appearance on the reception phone (doesn't have to be 
a DID)
4)  Create a hunt group for the pilot point DN whose members are the AC 
user for the site + pilot number for our VM.

What do I do for SRST mode though?  Some other set of translation 
patterns that only apply in fallback mode to take the main number and 
have it ring on the newly-created non-DID?