[cisco-voip] Issues with some calls into unity after userenters *
Nathan Reeves
nathan.a.reeves at gmail.com
Wed Oct 4 03:54:06 EDT 2006
Ended up getting TAC involved and we found that we had the following
command enabled on the MGCP Gateway:
'mgcp dtmf-relay voip codec all mode nse'
After removing this command, we could enter '*'. Prior to removing
the command we were seeing a double '*' come through to unity causing
the call to hang up.
We added the command:
'mgcp dtmf-relay voip codec all mode out-of-band'
and things are working fine.
Thanks for all the replies.
Nathan
On 9/30/06, Voll, Scott <Scott.Voll at wesd.org> wrote:
>
>
>
> We have seen this issue also and it is a DTMF issue in our case.
>
>
>
> Scott
>
>
More information about the cisco-voip
mailing list