[cisco-voip] Issues with some calls into unity after userenters *

[Aman Chugh]

That command should not have been there as the configuration of the gateway
comes from tftp server in case of MGCP and it's allways  'mgcp dtmf-relay
voip codec all mode out-of-band',Anyways nice to hear that Issue has been
resolved.

Aman


On 10/4/06, Nathan Reeves <nathan.a.reeves at gmail.com> wrote:
>
> Ended up getting TAC involved and we found that we had the following
> command enabled on the MGCP Gateway:
>
> 'mgcp dtmf-relay voip codec all mode nse'
>
> After removing this command, we could enter '*'.  Prior to removing
> the command we were seeing a double '*' come through to unity causing
> the call to hang up.
>
> We added the command:
> 'mgcp dtmf-relay voip codec all mode out-of-band'
> and things are working fine.
>
> Thanks for all the replies.
>
> Nathan
>
>
> On 9/30/06, Voll, Scott <Scott.Voll at wesd.org> wrote:
> >
> >
> >
> > We have seen this issue also and it is a DTMF issue in our case.
> >
> >
> >
> > Scott
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061004/6db4ea95/attachment.html