[cisco-voip] VG224

[Ahmad Cheikh-Moussa]

Hi!

On Oct 04, 06, Gary L. Pate wrote:
> In the past, we simply run the cable that comes with the VG224 and punch
> that down on a 24 port patch panel, and we punch our analog lines on another
> punch panel, and then we simply run a patch cable between them. The VG224
> goes port 0 to 23 though, and most patch panels are port 1-24, so you have
> to watch what you are doing and just know that port 1 on the patch panel is
> port 0 on the VG224, etc.
How did you know which pin is for which port ?
The rj-21 adapter has 50Pins. I think 2 Pins for every
Port, but  which Pin is the start?


Regards,
 Ahmad





-- 
Ahmad Cheikh-Moussa 
NetUSE AG
Dr.-Hell-Straße, 24107 Kiel, Germany
Telefon: +49 431 2390 400 --  Telefax: +49 431 2390 499
Service: Service at NetUSE.DE --  http://NetUSE.DE/