[cisco-voip] 7970 phoneload update went bad - anyway to recover or RMA?

[Aman Chugh]

Also have them connected to a power brick when you try the factory reset.

Aman


On 10/6/06, Aman Chugh <aman.chugh at gmail.com> wrote:
>
> Try this ,It might help
>
> http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7970/admin/4_1/7970trb.htm#wp1087544
>
>
> Aman
>
> On 10/6/06, Erick Bergquist <erickbe at yahoo.com> wrote:
> >
> > Updated 7970 firmware from 7.03 to 8.0(4)SR1 and all but 2 of the 7970s
> > took the update fine.  The 2 that didn't like it are powering up, then the
> > speaker/mic/headset LED light up and cycle, the screen lights up briefly and
> > line 1 lights up then it just power cycles and does same thing over and over
> > again.  Have unplugged phone from network and power sources completely and
> > same thing. Have plugged in elsewhere.
> >
> > RMA or is there a procedure to get these back?
> >
> > Thanks, Erick
> >
> >
> >
> >
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061006/c6749401/attachment.html