[cisco-voip] 7970 phoneload update went bad - anyway to recover or RMA?

[Aman Chugh]

Try this ,It might help

http://www.cisco.com/univercd/cc/td/doc/product/voice/c_ipphon/english/ipp7970/admin/4_1/7970trb.htm#wp1087544

Aman

On 10/6/06, Erick Bergquist <erickbe at yahoo.com> wrote:
>
> Updated 7970 firmware from 7.03 to 8.0(4)SR1 and all but 2 of the 7970s
> took the update fine.  The 2 that didn't like it are powering up, then the
> speaker/mic/headset LED light up and cycle, the screen lights up briefly and
> line 1 lights up then it just power cycles and does same thing over and over
> again.  Have unplugged phone from network and power sources completely and
> same thing. Have plugged in elsewhere.
>
> RMA or is there a procedure to get these back?
>
> Thanks, Erick
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061006/e1a24a2c/attachment.html