[cisco-voip] Phone Registration Rejected

[Candese Perez]

Manually adding the phone works.  (Thank you)
Any ideas on why I don't have a default.cnf file in my tftp directory if
auto-registration is enabled?

On 10/6/06, Ryan Ratliff <rratliff at cisco.com> wrote:
>
> Under System->CallManager there is a check box to disable auto-
> registration on a server.
>
> There will not be a config file on the TFTP server unless the phone
> is in the database.   I'd recommend you add the phone manually and it
> will then register.
>
> -Ryan
>
> On Oct 6, 2006, at 12:48 PM, Candese Perez wrote:
>
> I don't believe the phone is in the database because i can't find it
> when searching by it's MAC address.  When I look at my CM server
> configuration I don't see that auto-registration is disabled.  Is
> there some place else I should be looking to check for auto-
> registration?
>
>
>
> On 10/6/06, Ryan Ratliff <rratliff at cisco.com> wrote: Is the phone in
> the database?  If not and autoregistration is
> disabled then the config file won't exist and it won't register.
>
> If the phone is in the database try bouncing TFTP and then doing a
> TFTP GET on the macaddr.cnf.xml from a windows cmd prompt to see if
> you can get the file.
>
> -Ryan
>
> On Oct 6, 2006, at 12:26 PM, Candese Perez wrote:
>
> When I do a factory reset it looks for a file SEP+MAC address and
> then says file not found and returns to registration rejected.  In my
> trace file I can see  several TFTP error codes referencing the same
> message that the tftp server doesn't have the SEP+MAC.cnf.xml file
> nor does it have XMLDefault.cnf.xml.
>
> On 10/6/06, Brian Henry <Brian.Henry at apptis.com> wrote:
> I assume that you are not running in secure mode.
>
> 1.  Did you do a factory reset of the phone?
>
> Have you looked at the debugs on the phone web page to see what error
> code it is giving you? or you can attach the cable in the docs to the
> aux port to look at the phones boot up process and a more detailed view.
>
> Brian
>
> From: cisco-voip-bounces at puck.nether.net on behalf of Candese Perez
> Sent: Fri 10/6/2006 11:58 AM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Phone Registration Rejected
>
> I have a 7960 that will nto register with my CM 4.0 server, and I
> believe it is because the .cnf file is out of date or has changed as
> this phone has been in storage for several months.
>
> How can i get the phone to use the new file on CM if it won't
> register in CM.  Is there a way to push the new file to the phone?
>
> Candese
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061006/354ca6d3/attachment.html