[cisco-voip] "Alerting Name" on hunt pilots

[May, Simon]

Does this help ...

On the Hun Pilot configuration page, restrict the Connected Line and
Name Presentations.  Descriptions below.

I've not tried this, so let me know if it works.
------------------------------------------------------------

Connected Party Transformations 
Connected Line ID Presentation 
 Cisco CallManager uses connected line ID presentation (COLP/COLR) as a
supplementary service to allow or restrict the called party's phone
number on a call-by-call basis. 

Choose whether you want Cisco CallManager to allow or restrict the
display of the connected party's phone number on the calling party's
phone display for this hunt pilot. 

Choose Default if you do not want to change the connected line ID
presentation. Choose Allowed if you want to display the connected
party's phone number. Choose Restricted if you want Cisco CallManager to
block the display of the connected party's phone number. 

For more information about this field, see Table 15-9 in the Connected
Party Presentation and Restriction Settings section in the Cisco
CallManager System Guide. 
 
Connected Name Presentation 
 Cisco CallManager uses connected name presentation (CONP/CONR) as a
supplementary service to allow or restrict the called party's name on a
call-by-call basis. 

Choose whether you want Cisco CallManager to allow or restrict the
display of the connected party's name on the calling party's phone
display for this hunt pilot. 

Choose Default if you do not want to change the connected name
presentation. Choose Allowed if you want to display the connected
party's name. Choose Restricted if you want Cisco CallManager to block
the display of the connected party's name. 

For more information about this field, see Table 15-9 in the Connected
Party Presentation and Restriction Settings section in the Cisco
CallManager System Guide. 

-----------------------------------------------------------------------