[cisco-voip] Transfer direct to voice mail...

[Lelio Fulgenzi]

check over your config....i followed these instructions and it works well. others have as well i believe. 

the first time it didn't work for me either and after rechecking i realized i missed something, the vm profile's css or something like that.

i used a CTI route point forwarded to voicemail, which does keep called party.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Jonathan Charles 
  To: Cisco Voip 
  Sent: Thursday, October 19, 2006 12:50 PM
  Subject: [cisco-voip] Transfer direct to voice mail...


  OK, I don't like the instructions here:

  http://www.cisco.com/warp/public/788/AVVID/transfer_direct_box.html

  So, I created a translation pattern *.XXXX to go to the voicemail pilot... and it works (well, not really), but it puts you into the generic opening greeting because the original called party is not retained. 

  How do I retain the original called party so it goes to that user's voicemail?

  Would an alternate extension work? And if so, what would it be to? *1444 for example?




  Jonathan



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061019/d886e854/attachment.html