[cisco-voip] Error when opening lines - CM 4.1(3) SR3c

[Scott Coner (US)]

I rebooted both servers this morning.  DBLhelper shows no problems...

________________________________

From: Jonathan Charles [mailto:jonvoip at gmail.com]
Sent: Fri 10/20/2006 10:03 AM
To: Scott Coner (US)
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Error when opening lines - CM 4.1(3) SR3c


Check the RIS Data Collector service... you may need to reboot the cluster to get everything back in sync...

BTW, usually, you get that error on the SUB...



Jonathan


On 10/20/06, Scott Coner (US) <scott.coner at us.didata.com> wrote: 

 Just upgraded from 4.0(2)a to 4.1(3)SR3c.  When trying to open line configuration pages on the publisher I get:
  

 The following error occurred while attempting to retrieve and display the requested information:

 Automation server can't create object (-2146827859)

 This doesn't occur when I do it from the Subscriber.  Anyone seen this before I go to TAC?

  

 Scott

 

________________________________

 

 Disclaimer: This e-mail communication and any attachments may contain confidential and privileged information and is for use by the designated addressee(s) named above only. If you are not the intended addressee, you are hereby notified that you have received this communication in error and that any use or reproduction of this email or its contents is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by replying to this message and deleting it from your computer. Thank you. 


 _______________________________________________
 cisco-voip mailing list
 cisco-voip at puck.nether.net
 https://puck.nether.net/mailman/listinfo/cisco-voip
 
 
 





-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061020/48b0d58a/attachment.html