[cisco-voip] Error when opening lines - CM 4.1(3) SR3c

[Jonathan Charles]

Check the RIS Data Collector service... you may need to reboot the cluster
to get everything back in sync...

BTW, usually, you get that error on the SUB...



Jonathan

On 10/20/06, Scott Coner (US) <scott.coner at us.didata.com> wrote:
>
> Just upgraded from 4.0(2)a to 4.1(3)SR3c.  When trying to open line
> configuration pages on the publisher I get:
>
>
> The following error occurred while attempting to retrieve and display the
> requested information:
>
> Automation server can't create object (-2146827859)
>
> This doesn't occur when I do it from the Subscriber.  Anyone seen this
> before I go to TAC?
>
>
>
> Scott
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061020/e7ba4f60/attachment-0001.html