[cisco-voip] CMM module and Global Load Balancing Protocol

[Carter, Bill]

Any know issues between Cat 6500 CMM module and GLBP.  I have
intermittent connectivity issues.  On L3 interfaces arp timeout is set
to 200 seconds.  It seams for these 200 second intervals ping will fail
for one period, the succeed for the next.
 
At the same time I am pinging an end device on the same VLAN as the CMM
modules with no problems.
 
 
Bill Carter
Sr. Business Communications Analyst
Sentinel Technologies
(O) 217.391.5015
 


This email may contain proprietary and confidential information for the sole use of the intended recipient. 
Any review, retransmission, dissemination, or other use of this information by persons or entities other than 
the intended recipient is prohibited. If you are not the intended recipient, please contact the sender and 
delete all copies. To the extent that opinions are expressed in this message, they are not necessarily the 
opinions of Sentinel Technologies or any of its affiliates, employees, directors, officers or shareholders.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061020/24c6d848/attachment-0001.html