[cisco-voip] Policy routing on Dial Plan

[Anthony Kouloglou]

Thanks Ryan,
i am building the config with many partitions and calling search 
spaces!! (4 different sites!!) but i could make it
work as you said.

Cheers
akoul

Ryan Ratliff wrote:
> You have to do this via Partitions/CSS.
>
> -Ryan
>
> On Oct 23, 2006, at 6:21 AM, Anthony Kouloglou wrote:
>
> Is there a way to make something like policy routing on a CCM dialplan?
> I want to have route patterns that look up the source number of the
> calling extension and no the destination.
>
> So,
> the case is that you have 2 voice gateways on 2 different countries and
> one site at each country, but you want to use only one number to dial
> external calls (9 for example)
>
> Assume that at site 1 there is one CCM cluster.
> 1st site extensions 1xxx and vgw A
> 2nd site extensions 2xxx and vgw B
>
> I will configure:
> One Route list with vgw A first and B second      --->RL1
> and A second route list with vgw B first and A second---->RL2
>
> One route pattern which says: if the calling number is 1xxx then Route
> list 1
> and another: if the calling number is 2xxx then Route list 2
>
> In that way, you don't have to assign one external number / site.
> Because what will happen if you have more than 10 sites.
> i don't thing that using 2 digits to reach outside lines is handy!!
>
> Any ideas?
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>