[cisco-voip] E1 trunk group on as5300
Klaus Darilion
klaus.mailinglists at pernau.at
Tue Oct 24 10:30:24 EDT 2006
Fedorov, Konstantin wrote:
> Hi Klaus,
>
> Both ways appropriate.
>
> I prefer group ports if this ports lead to the same provider for
> example.
Hi Konstantin!
Thanks for the answer. Can you tell me how this grouping is done (e.g.
the cisco name/command is sufficient).
I googled the whole day at cisco.com but could not find it.
thanks
klaus
>
>
> -----------------------
> Sincerely Yours,
> Konstantin Fedorov
>
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Klaus Darilion
> Sent: Tuesday, October 24, 2006 4:53 PM
> To: cisco-voip
> Subject: [cisco-voip] E1 trunk group on as5300
>
> Hi!
>
> I have an AS5300 with 4xE1 as SIP<->PSTN Gateway. For SIP--->PSTN calls,
>
> I want to use all the E1 interfaces.
>
> Can someone help me how to configure this?
>
> Is it necessary to define a trunk and put the four E1 lines into the
> trunk, or is it sufficient to have 4 identical pots dial-peers and the
> router chooses the next dial-peer if on is congested?
>
> thanks
> Klaus
>
>
--
Klaus Darilion
nic.at
More information about the cisco-voip
mailing list