[cisco-voip] Jumbo Frames

[David Fielder (US)]

I have a customer who is converting their 6509's from Hybrid to Native
mode. They are currently using the following config in CatOS:

 

#module 1 : 2-port 1000BaseX Supervisor

set port jumbo  1/1-2  enable

 

What is the best way to configure this in IOS?

 

 

David Fielder

Senior Engineer

Dimension Data

Office: (336) 510-9431

Mobile: (336) 669-5129

david.fielder at us.didata.com

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061024/d11b2f39/attachment.html