[cisco-voip] Jumbo Frames

[Jonathan Charles]

Int range gi1/1 - 2
mtu 9216



Jonathan

On 10/24/06, David Fielder (US) <David.Fielder at us.didata.com> wrote:
>
>  I have a customer who is converting their 6509's from Hybrid to Native
> mode. They are currently using the following config in CatOS:
>
>
>
> #module 1 : 2-port 1000BaseX Supervisor
>
> set port jumbo  1/1-2  enable
>
>
>
> What is the best way to configure this in IOS?
>
>
>
>
>
> *David Fielder*
>
> Senior Engineer
>
> Dimension Data
>
> Office: (336) 510-9431
>
> Mobile: (336) 669-5129
>
> david.fielder at us.didata.com
>
>
>
> ------------------------------
>
> * Disclaimer: This e-mail communication and any attachments may contain
> confidential and privileged information and is for use by the designated
> addressee(s) named above only. If you are not the intended addressee, you
> are hereby notified that you have received this communication in error and
> that any use or reproduction of this email or its contents is strictly
> prohibited and may be unlawful. If you have received this communication in
> error, please notify us immediately by replying to this message and deleting
> it from your computer. Thank you. *
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061024/01fcfae3/attachment.html