[cisco-voip] Jumbo Frames

[Fedorov, Konstantin]

Hi,

system jumbomtu <value>

or increase mtu on interface

-----------------------
Sincerely Yours,
Konstantin Fedorov

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of David Fielder
(US)
Sent: Tuesday, October 24, 2006 6:58 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Jumbo Frames

I have a customer who is converting their 6509's from Hybrid to Native

mode. They are currently using the following config in CatOS:



 



#module 1 : 2-port 1000BaseX Supervisor



set port jumbo  1/1-2  enable



 



What is the best way to configure this in IOS?



 



 



David Fielder



Senior Engineer



Dimension Data



Office: (336) 510-9431



Mobile: (336) 669-5129



david.fielder at us.didata.com



 









-----------------------------------------

Disclaimer:



This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.