[cisco-voip] 4506 switchport config for 7936

[Casanova, Chase]

The reason I am asking is because we are having some intermittent issues
with a few of our 7936's and I am trying to correlate some similarities
in setups.

 

Would not having the voice vlan on a port cause any auto qos problems?
The switchport should still be able to tell that the device is a
cisco-phone even though it is not using the voice vlan, correct?

 

-C

________________________________

From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
Sent: Thursday, October 26, 2006 11:24 AM
To: Jonathan Charles
Cc: Casanova, Chase; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 4506 switchport config for 7936

 

I've heard this from a few places, for us, we haven't had any problems.
Wierd.

 

------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."

	----- Original Message ----- 

	From: Jonathan Charles <mailto:jonvoip at gmail.com>  

	To: Lelio Fulgenzi <mailto:lelio at uoguelph.ca>  

	Cc: Casanova, Chase <mailto:ccasanova at rti.org>  ;
cisco-voip at puck.nether.net 

	Sent: Thursday, October 26, 2006 11:18 AM

	Subject: Re: [cisco-voip] 4506 switchport config for 7936

	 

	I have found that with the 7935 and 7936s that they do not
particularly like an access and voice vlan together on a port... just
configure the port for access on the voice vlan...
	
	
	
	Jonathan

	On 10/24/06, Lelio Fulgenzi <lelio at uoguelph.ca> wrote: 

	It all depends on your security model. Why configure a port
differently than all your other ports? I don't think there is any added
value and quite honestly, I think there's more harm than anything. Port
management is a big deal around here, so the easier the config the
better. By sticking with a standard, you can move your device to any
port and it works and you can move any device, laptop or phone, to that
port and it works.

	 

	My (much more than) two cents...

	 

	
------------------------------------------------------------------------
--------
	Lelio Fulgenzi, B.A.
	Senior Analyst (CCS) * University of Guelph * Guelph, Ontario
N1G 2W1
	(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
	
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
	"I can eat fifty eggs." "Nobody can eat fifty eggs."

		

		----- Original Message ----- 

		From: Casanova, Chase <mailto:ccasanova at rti.org>  

		To: cisco-voip at puck.nether.net 

		Sent: Tuesday, October 24, 2006 3:33 PM

		Subject: [cisco-voip] 4506 switchport config for 7936

		 

		Since the 7936's don't have PC ports, is there a reason
to setup a voice vlan on the switchport or is just setting the
switchport up as access vlan with the access vlan being the voice vlan
enough?

		 

		Thanks,

		-C

		
________________________________


		_______________________________________________
		cisco-voip mailing list
		cisco-voip at puck.nether.net
		https://puck.nether.net/mailman/listinfo/cisco-voip

	
	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip
	
	

	 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061026/0d2a4653/attachment-0001.html