[cisco-voip] 30 second delay in selectRoute(): CCM 5.0.4 only.
Wes Sisk
wsisk at cisco.com
Thu Oct 26 18:23:20 EDT 2006
Paul,
I need some traces to see what is going on. Reproduce the problem,
grab the most recently modifed 2 files from each of these directories
(2 newest *.txt or *.log files per directory), zip them up, and
unicast them to me. pls include the calling/called/redirecting party
number.
c:\program files\cisco\trace\ccm
c:\program files\cisco\trace\cti
c:\program files\cisco\trace\sdl
/Wes
On Oct 26, 2006, at 4:09 PM, Paul Yago wrote:
Thanks Wes,
If you define an overlap as a potential for more digits, then there
is no overlap in this case. I’m trying to route to an extension which
has no other overlapping route patterns on the system.
Actually I’m trying to route to an MWI extension, and modifying the
original caller ID. This has the effect of setting the MWI for the
modified address. This worked perfectly in 4.1x, and it works in 5.x,
except for this 30 second delay. The log says it’s waiting 30 seconds
for a CallRedirectResponse, but I’m not sure how to provide this from
the app.
There is a routeEndEvent which usually occurs right after my call to
selectRoute(), and interrupting this selectRoute() thread is the only
way I’ve been able to break out of this 30 second waiting state.
3791: Oct 26 10:44:49.552 PDT %JTAPI-CTIIMPL-7-UNK:(P1-10.2.0.51)
receiveResponse: timed out waiting 30000 milliseconds for
com.cisco.cti.protocol.CallRedirectResponse sequenceNumber= 533
Any idea how I could provide a CallRedirectResponse? Or what system
parameter is affecting this timeout?
Thanks,
Paul
From: Wes Sisk [mailto:wsisk at cisco.com]
Sent: Thursday, October 26, 2006 6:57 AM
To: Paul Yago
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] 30 second delay in selectRoute(): CCM 5.0.4
only.
Yes,
CSCsf20938. CTI used to default to 'enbloc' dialing behavior.
After recent changes (CSCse42819/CSCsc05602/CSCsb95000) the default
behavior is now overlap sending so it always waits for additional
digits if there is a potential overlap in CM's digit analysis.
Current workaround is to remove the potential overlap or just wait.
This is being addressed in a 5.0(4)es due out soon - though because
it is and ES, you will need to contact TAC to get it.
/Wes
Paul Yago wrote:
Has anyone seen a 30 second delay in the CiscoRouteSession.selectRoute
() method found in jtapi.jar 3.0(4.5) ?
ciscoRouteSession.selectRoute(routeSelected,
CiscoRouteSession.ROUTEADDRESS_SEARCH_SPACE, modifiedAddresses);
I’ve tried interrupting the thread from the endRoute event, which
works sometimes, but endRoute doesn’t always come immediately after
the call to selectRoute().
…any similar problems out there?
Thanks,
Paul
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20061026/80551121/attachment-0001.html
More information about the cisco-voip
mailing list