[cisco-voip] CIPC-2-0-1a.loads - Does it exist?

[Ryan Ratliff]

Since there was no autoupdate path to CIPC 2.0 there was no package  
released to update the device defaults.  I would expect that when the  
next version is released they will include the files necessary to  
update device defaults.

-Ryan

On Aug 31, 2006, at 2:17 PM, Stu Packett wrote:

My concern is, how does the CIPC client know to get an update from  
the TFTP server when my device defaults still shows 1.1(3)?  For  
example, if Cisco releases 2.0(2), the client has no idea that 2.0(2)  
is out because the TFTP server is still set to 1.1(3).  I know in  
previous versions of CIPC, they had you run a SCCP install, but if  
the new CIPC 2.0 uses the same load as the 797x, then I guess I  
shouldn't worry much.  Thanks.

From: Ortiz, Carlos [mailto:CORTIZ at broward.org]
Sent: Thursday, August 31, 2006 11:12 AM
To: Stu Packett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CIPC-2-0-1a.loads - Does it exist?

You said it works fine so I think you answered your own question.  I  
think since it uses SCCP it should use the same load that any 797X  
should use.  I have 2.0(1a) running and have not had to install any  
additional phone loads…..



Carlos



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
bounces at puck.nether.net] On Behalf Of Stu Packett
Sent: Thursday, August 31, 2006 1:36 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CIPC-2-0-1a.loads - Does it exist?



I just downloaded IP Communicator 2.0(1a) and installed it on my  
laptop and it works just fine, but don't I need to install the IP  
Communicator phone load on the TFTP server?  My 'Device Defaults'  
currently shows CIPC-1-1-3-0 under 'Cisco IP Communicator' and I  
would assume it should show CIPC-2-0-1a under it.  I remember when I  
first installed version 1.1(3), I had to run some device package  
installation so I created the files under the TFTP directory.  Is  
this not the case for version 2.0?  I can't seem to find (if it  
exists) the phone loads for CIPC 2.0.  Is anyone experiencing the  
same thing I am?  Thanks in advance.



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip