[cisco-voip] Save Ringer Volume settings

[Lelio Fulgenzi]

The "save" softkey is the one that appears immediately after you hit the "settings" button, while you are still in the menu. 


  ----- Original Message ----- 
  From: Ortiz, Carlos 
  To: cisco-voip at puck.nether.net 
  Sent: Friday, September 01, 2006 8:59 AM
  Subject: [cisco-voip] Save Ringer Volume settings


  There was a post here yesterday about saving ring volume settings.  Not sure if this applies but read below and see if this is the case with your Call Mgr setup.  

   

   

        Settings Access :
       Indicates whether the Settings button on the phone is functional. When Settings Access is enabled, you can change the phone network configuration, ring type, and volume on the phone. When Settings Access is disabled, the Settings button is completely disabled; no options appear when you press the button. Also, you cannot adjust the ringer volume or save any volume settings. When Settings Access is restricted, you can only access User Preferences and volume settings. By default, Settings Access is enabled. 
        This is a required field.
        Default: Enabled.

         

        Carlos
       

   



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060901/63b6f984/attachment-0001.html