[cisco-voip] CIPC-2-0-1a.loads - Does it exist?

[Selt9]

no, such files will not be included because upgrade from 1.1.x to 2.x is not supported and will not be...
  so, if they include such files there will be a condition to raise all present installation of CIPC to 2.0 version before making next version available on tftp server...
   
  

"Ortiz, Carlos" <CORTIZ at broward.org> wrote:
  Now I see what you are talking about. Scratch what I said
yesterday.....

-----Original Message-----
From: Ryan Ratliff [mailto:rratliff at cisco.com] 
Sent: Friday, September 01, 2006 8:59 AM
To: Stu Packett
Cc: Ortiz, Carlos; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CIPC-2-0-1a.loads - Does it exist?

Since there was no autoupdate path to CIPC 2.0 there was no package 
released to update the device defaults. I would expect that when the 
next version is released they will include the files necessary to 
update device defaults.

-Ryan

On Aug 31, 2006, at 2:17 PM, Stu Packett wrote:

My concern is, how does the CIPC client know to get an update from 
the TFTP server when my device defaults still shows 1.1(3)? For 
example, if Cisco releases 2.0(2), the client has no idea that 2.0(2) 
is out because the TFTP server is still set to 1.1(3). I know in 
previous versions of CIPC, they had you run a SCCP install, but if 
the new CIPC 2.0 uses the same load as the 797x, then I guess I 
shouldn't worry much. Thanks.

From: Ortiz, Carlos [mailto:CORTIZ at broward.org]
Sent: Thursday, August 31, 2006 11:12 AM
To: Stu Packett; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] CIPC-2-0-1a.loads - Does it exist?

You said it works fine so I think you answered your own question. I 
think since it uses SCCP it should use the same load that any 797X 
should use. I have 2.0(1a) running and have not had to install any 
additional phone loads.....



Carlos



From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip- 
bounces at puck.nether.net] On Behalf Of Stu Packett
Sent: Thursday, August 31, 2006 1:36 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CIPC-2-0-1a.loads - Does it exist?



I just downloaded IP Communicator 2.0(1a) and installed it on my 
laptop and it works just fine, but don't I need to install the IP 
Communicator phone load on the TFTP server? My 'Device Defaults' 
currently shows CIPC-1-1-3-0 under 'Cisco IP Communicator' and I 
would assume it should show CIPC-2-0-1a under it. I remember when I 
first installed version 1.1(3), I had to run some device package 
installation so I created the files under the TFTP directory. Is 
this not the case for version 2.0? I can't seem to find (if it 
exists) the phone loads for CIPC 2.0. Is anyone experiencing the 
same thing I am? Thanks in advance.



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


 		
---------------------------------
 All-new Yahoo! Mail - Fire up a more powerful email and get things done faster.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060901/620d4547/attachment.html