[cisco-voip] SRST transfer user 4 digits to an 11 digit extension

[STEVEN CASPER]

 We use 11 digit extensions at our site and would like to be able to
transfer using 4 digits when in SRST mode just as can be done when not
in SRST. Transfer works fine to an the actual 11 digit extension but we
have not been able to figure out how to allow a 4 digit transfer. Here
is the SRST config:

call-manager-fallback
 max-conferences 4 gain -6
 transfer-system full-blind
 ip source-address 10.120.224.1 port 2000 strict-match
 max-ephones 40
 max-dn 80 dual-line
 transfer-pattern 1716849....
 transfer-pattern 2...
 voicemail 914103476301
 translation-profile incoming 2
 translation-profile outgoing 2
 call-forward busy 17168492502
 call-forward noan 17168492501 timeout 16
 time-zone 12                     

and the associated translation

voice translation-rule 2
 rule 1 /^\(2...\)$/ /1716849\1/  

voice translation-profile 2
 translate calling 2
 translate called 2    

The translation rule is good because inbound 4 digit DID works when in
SRST, any advice would be appreciated.

         



Thanks!

Steve Casper
Voice Technologies
M&T Bank
(410) 347-6026