[cisco-voip] Cisco voice gw - caller id

[Ryan Ratliff]

Is your T1 a CAS trunk or PRI?


-Ryan

On Sep 2, 2006, at 12:07 AM, Bob A. Bowie wrote:

I have in my current lab setup the following:
CCM 4.1 ->3825 -- t1 --3825 <-- CCM 4.1

I am using the 1MFT1 module between routers back to back t1 cable.
I have configured the H323 Gw on both CCM's and the Cisco IOS Voice GW
routers.
I can call between the CCM's but get "Unknown number" on the receving IP
Phone.

What do I need to do to pass the caller id info?
Can I pass the caller-id info with H323 and T1 or do I need MGCP/PRI?

The caller-id command does not seem to be available under the voice-port
config.
I am using 12.4 ip adv service IOS on the Voice GW routers.

Thanks



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip