[cisco-voip] SNMP monitoring MGCP gateway

[Wes Sisk]

Dylan,

Is CSCsa67949 what you are looking for:
<B>Symptom:</B>
No way to determine from CCM when all outbound PRI trunks are busy.

<B>Conditions:</B>
CallManager MGCP PRI endpoints.

<B>Workaround:</B>
If an IOS gateway, use SNMP to poll
1.3.6.1.4.1.9.10.19.1.1.9.1
Description  	An entry in the DS0 Usage table.

Use cpmDS1UsageSlotIndex and cpmDS1UsagePortIndex to specify which  
ds1,then use  cpmDS1ActiveDS0s to find the number of active calls per  
ds1.

If 6608 or dt-24+ there is no workaround other than possibly ART/CAR  
Gateway utilization reports



/Wes

On Sep 1, 2006, at 7:28 PM, Dylan Vanderhoof wrote:

Replying to myself, but I need to restate the question, since some
snmpwalking of a few callmanagers of different versions showed nearly
nothing use.

Can I get usage stats on trunks/gateways via snmp at all with an MGCP
backhaul in place?  Am I missing some obvious OID on my VG200 gateway?

I know AXL is available, but its not really an option at this point for
what I'm looking at.

Thanks,
Dylan

> -----Original Message-----
> From: Dylan Vanderhoof
> Sent: Friday, September 01, 2006 12:32 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] SNMP monitoring MGCP gateway
>
>
> Is there any useful information that can be polled via SNMP on an MGCP
> voice gateway?  I'm looking at my VG200 and not finding much (I assume
> due to the backhaul), but I figured I'd ask.
>
> Obviously call stats are available via SNMP on the callmanager.
>
> Thanks,
> Dylan
>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip