[cisco-voip] multi calls getting messed up

[Lelio Fulgenzi]

I think I ran into that with the early versions of 7. Try FW 8 or higher and then try to replicate the problem.

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"I can eat fifty eggs." "Nobody can eat fifty eggs."
  ----- Original Message ----- 
  From: Voll, Scott 
  To: cisco-voip at puck.nether.net 
  Sent: Tuesday, September 26, 2006 5:56 PM
  Subject: [cisco-voip] multi calls getting messed up


  I'm running CM 4.1.3sr2 with a 7960g running Firmware 7.02.300 and my 3640 VGW has a PRI.

   

  With that all being said, has anyone seen issues where if 4 or 5 calls all come in at the same time and the receptionist starts putting everyone on hold she can't get back to the calls to do what ever she may need to do.

   

  I allow 16 calls with a 8 call busy trigger.  I thought it might be a Bandwidth issue so I have increased the bandwidth to that region.  Is this a Firmware issue?

   

  One happens with multiple calls all coming in at the same time.  She doesn't have the issue when she has multiple calls on hold if they are all spaced out.

   

  TIA

   

  Scott



------------------------------------------------------------------------------


  _______________________________________________
  cisco-voip mailing list
  cisco-voip at puck.nether.net
  https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20060926/96fbdc46/attachment-0001.html